Oscilloscope Scanning (CB20119E)

Details
Written by: Newton C. Braga

 

This circuit was found in an old American documentation. Its purpose is a proportional scanning signal for the oscilloscope of the time, which used cathode ray tubes.

 


| Clique na imagem para ampliar |

 

 

 

  

Latest

Circuit Bench

  • Voltage Relay (CB4151E)

          This circuit causes the relay to be energized when the input voltage exceeds the voltage value of...

  • RTTY Circuit (CB20271E)

      The maximum frequency of this circuit is 500 kHz. We found it in a documentation for radio...

  • Power Line Antenna (CB19177E)

      The mains cables work as antennas. We can take advantage of them with this circuit that consists of a...

Buscador de Datasheets


N° de Componente